Rapid Prototype Blog

Posts Tagged ‘Information’

Camcorder and Camera Information 3D Digital Cameras

Digital cameras which amenability manage 3D images might seem straight out of illumination fiction, however that is not the case. Visit here http://camcorder-information.blogspot.com/

Not just because the technology thanks to taking 3D images already exists, but also being the technology is simpler than most people understand.3D or more accurately the illusion of three dimensions is immoderately untroublesome to achieve, and in that we conclude camera available to consumers for this markedly purpose. One bent think that a 3D camera would have to somehow gang up a scene from all angles again locations, and a real 3D “scanner” would be something like that, however a what a 3D camera purely does is to profit the identical mechanism our eye uses to meet images, which is to cluster bodily from two angles.A 3D camera will come suppress two lenses and sensors which capture the prone shot from two divers angles which are similar to the angles from which our eyes perceive things. Now if we scare up matchless image for the right eye and one since the left, further then display those images to each hypothesis individually, what we will see is an illusion of depth to the image.

An adventurous person could try to achieve the same effect due to a 3d camera by capturing the same apprehension from two angles using two Digital Cameras, or by delicate the same shot from two angles. These techniques will allow you to transact impartial 3D shots of stationary or very pastoral moving objects, however to take proper 3D images you craving a 3D camera.Currently there are very few 3D cameras available for consumers, however an pageant of a recently launched camera targeted towards the commonplace clambake is the FujiFilm FinePix 3D W1 camera. As 3d photography becomes fresh popular though, you duty feature to take up more camera which allow consumers to take 3d pictures. Visit here http://camcorder-information.blogspot.com/

This article is part of the series Information Architecture for wireframes using Justinmind Prototyper

A Navigation map of you site will help you understand the pathways users take, helping you create shortcuts, cutting off unnecessary pages or steps, reducing bounce rates and increasing usability. It is very important to create the flowcharts before designing the wireframes.

Collaborative work

With Justinmind Prototyper, your navigation map can be commented and all requirements can be linked to specific pages with drag and drop, so, for example, the Project Manager can write that page 2 needs a login, the Information Architect can describe what kind of content goes on the library page, and the designers can change sizes or typography, and annotate that on the project. All comments will be saved and organized in a database, which can be filtered according to many criteria.

Advantages of interface-flow diagrams

On AgileModeling.com, Scott W. Amber says “User interface-flow diagrams are typically used for one of two purposes. First, they are used to model the interactions that users have with your software, as defined in a single use case. For example, a use case can refer to several screens and provides insight into how they are used. Based on this information, you can develop a user interface-flow diagram that reflects the behavioral view of the single use case. Second, (…) they enable you to gain a high-level overview of the user interface for your application. This overview is effectively the combination of all the behavioral views derived from your use cases, the result being called the architectural view of your user interface (Constantine and Lockwood 1999). I prefer to take the high-level overview approach, also referred to as the architectural approach, because it enables me to understand the complete user interface for a system.” http://www.agilemodeling.com/artifacts/uiFlowDiagram.htm

He mentions several sources and articles related to the subjects on his site, so it’s worth a visit.

Tip: KISS – keep it simple, stupid

Flowcharts don’t necessarily need all information you’ll have on your website: just what’s crucial. You’ll have more information on your homepage than described, but obviously, you just need the things you think your users will need less. For more info about it, please read Steve Krug’s website (http://www.sensible.com/)

Presented as a small, nearly inconsequential feature on the Gibson Lifestyle newsletter is an article featuring video of the Gibson Robot tuning system. Not so newsworthy. . . until you realize that the system is installed on an EJ160E John Lennon ROund Shoulder acoustic.
Video Rating: 4 / 5

Whether you are manufacturing small electronic appliances, automobiles, consumer goods or large-scale parts, you already know just how important inspection and quality control are towards the continued success of your organization.

3D laser scanning is not only used for inspection purposes. The ability to scan an object or surroundings and produce digital 3D models with the collected information is proving very helpful across diverse fields. Other areas in which 3D laser imaging is creating a great impact consist of reverse engineering, the film business, anthropology and industrial design.

The accuracy of 3D laser scanning to that of top CMMs, is typically less. In general non-contact methods are slightly less accurate and repeatable, but provide greater resolution and higher speed. The ability to handle the point cloud of data produced by these approaches has also grown to be much more rigorous overtime with the advances in computing processing hardware. The capability to do full part inspection using point cloud information is now considered a necessary tool within the metrology world. A robust software package ought to handle the inspection job flow from scanning to COP manipulation and CAD analysis. For reverse engineering apps it is required to gather large point cloud information and also to organize the data for the export to reverse engineering packages.

In the industrial manufacturing space, the primary application is dimensional quality control and reverse engineering. IE in the automotive and aerospace manufacturing sectors inspection for sheet metal parts, turbine blades and automotive parts are integrated into the process. In the food industry, 3D laser scanning is being utilized for volume measurement, 360 scanning of baked goods. You may wish to use 3D laser imaging to ensure the integrity of specific components involved with manufacturing. Alternatively, you might be much more worried with verifying the final products conform to one another because of the component configuration and industry compliance requirements. 3D laser imaging greatly minimizes inspection time, thereby expediting complete manufacturing time, and almost eliminates the chance for human error.

3D laser imaging minimizes the possibility of product liability suits. By thoroughly inspecting all elements of assembly with 3D laser imaging technology (and eliminating the variability of human error), you will be delivering a quality and much more stringently manufactured product. You will also have the ability to use the 3D laser imaging information collected to document for SPC, compliance and traceability.

By employing 3D laser imaging for inspection and control, your company could be improving manufacturing yield, while demonstrating a commitment to a finished product of uncompromised quality. The 3D industry continues to evolve and broaden. Potential buyers need to define the objectives and goal of inspection and work backwards towards the technology, either tactile or non contact. Be realistic about your measurement needs; match your product for the measurement technology. With the technologies growing to be increasingly well-liked and accessible, finding the right 3D laser imaging match for your requirements ought to be a relatively simple procedure.

Gone are the days that producing a prototype normally took long hours to finish. It can be recalled that creating a prototype typically ends up in a lengthy process and skilled workers painstakingly do the labor hence requires high-cost. The need to create a speedy process to automate the construction of physical objects into sturdy physical models, commonly known as additive manufacturing, brought into existence. The solution is rapid prototyping with faster and easy-to-use 3D Printer. The breakthrough of rapid prototyping machines has become an answer for many plastics manufacturers to fabricate quality-produced parts comparatively in minute amounts.

How does a 3D printer work? The technologies used for 3D printing varies throughout the developers of rapid prototyping machines. Nowadays, the principle of inkjet printing system vastly applied in making 3D printers due to its fast turn-around in creating models that closely simulate the appearance, feel and functionality of product prototypes. Though they look like the copiers and printers, we see outside, 3D Printer is something completely different because these are not ink-on-paper printers. The process begins from the print head whereby thin droplets of materials deposited onto a surface, one on top of another in a successive manner until a 3D model is completed. The diameter of 3D particles deposited is around 50 to 100 micrometers. Industry leader 3D Systems Corp based in California pioneered this.

The use of 3D printers has been widely used even ordinary consumers. Well-established applications include design visualization, metal casting, prototyping and CAD for mechanical and design engineers’ projects. For architects and civil engineers, creating entire building prototypes made possible for them to detect failures on their designs. Recently, it has jumped off into a new realm in biotechnology to print a 3D Printer of body parts from cells. It is a strikingly promising application due its capability of producing tiny prototypes thereby does not need to borrow of human parts from someone else. Other applications include making consumer toys, reconstruction of fossils, replicating ancient artifacts among others.

Such development of 3D printing recognized as one of the most tumultuous emergent IT technologies. From the highly expensive printers as it was first introduced, costs of machines are highly dramatic in the sense that it is very affordable due to its falling prices. Evolution of 3D printing has been positively looked forward by many technologists because most of the changes are widely accepted by many consumers. Aside from the big players of 3D print technology such as 3-D Systems, Desktop Factory and Z Corporation, companies actively involved are HP, Canon and Xerox. Other major 2D printer technology providers are still yet to be determined if they want to be engaged in this highly exciting technology.

It is time to usher in a transformation- It is time to gain from dental implants have led the way towards effective solutions to dental problems. No longer do people have to rely on old and painful measures of fixing dental problems. The technological boom has completely changed the way dental diseases are viewed and controlled. There are techniques to analyze the nature and extent of the entire problem and then find an effective solution to it – in the fastest possible time and in an extremely feasible manner. Dental implants Chicago makes use of this advanced genre of dental technology at every step and stage.

This can be appropriately examined by means of the following-

Using state-of-the-art dental technology is not just a cliché, it is a fact at dental implants Chicago. High definition 3-D imaging systems are used for the purpose of diagnosis and treatment. By scanning your tooth, the need for dental implants is determined and a treatment plan is made, shaping the way to go about the implanting procedure.

The “All-in-one” Center of dental implants, Chicago, provides you with a perfect blend of multiple dental technologies. These range from dental implant laboratories and 3D iCAT dental scanners to on-site implant surgeons and specialized restorative dentists. All of these collaboratively provide you with the best possible experience in the finest manner imaginable.

Using the latest dental technology, the quality and density of the jawbone is investigated. This helps to analyze the impact which the dental implant might have on the adjacent teeth and your facial structure. An experienced set of doctors which includes periodontists, prosthodontists, physicians and oral surgeons make sure that your dental health remains their priority.

Dental implants, Chicago also conducts scientific research in the field of dental technology. Moreover awareness campaigns are planned and organized to bring people in isolated arenas into the mainstream and inform them of the dental illnesses which might cause harm. Dental implants have proven to be a boon for all sorts of dental diseases ranging from cavities to missing teeth and from pyorrhea to tooth gaps.

Speaking of technology, people generally understand the information and communication revolution. However, there is another side to the word. It implies the latest upgrades in the sphere of dental research. Making adequate use of the dental technology developed, is an everyday occurrence with dental implants, Chicago. After all, it’s about making your life better and letting you progress on the road to recovery. It is high time that you regain your lost smile.

For more information, log on to www.yourimplantsolutions.com.

What is rapid prototyping software?
The activity of rapid prototyping software is an important part of software development. It is important to create prototypes of the software to test the software’s workings. These prototypes are actually incomplete versions of the software program that is underway in development.

How does rapid prototyping software work?
The main features of the software being prototyped are first looked at. In rapid prototyping software, the plastic mould prototype being developed does not perform the entire functional spectrum of the software, but only simulates some of the plastic mould aspects or features. The actual and eventual program may be very different from these simulations of it when it is actually implemented.

Why rapid prototyping software?
Conventionally, the purpose of rapid prototyping software is to let users of the eventual software an evaluation of the design proposals given by the developer. Users are allowed to actually try out the simulations so that they do not have to make an plastic mold evaluation decision based solely on descriptions of the program and can actually get a sense of it before making a judgment.

Many a times, there are requirements that developers have not thought about that users might actually find useful. rapid prototyping software allows users to bring this to the notice of the developers and therefore betters the commercial relationship between the client and solution providers.

Benefits of rapid prototyping rapid prototype software
1. The designer and implementer of the software get to obtain feedback directly from the users who would be using the final product. Therefore, he can customize it to be a success right from its inception and increase its probability of becoming a hit.
2. Clients can actually do a match of the rapid prototype software specifications they have provided with the software being developed and therefore any changes that need plastic mold to make can be done then itself.
3. The software engineer is given an opportunity to check on the accuracy of the initial project and whether planned deadlines and milestones can be achieved in time.
4. Since the 1970s, the techniques used in rapid prototyping software have been refined time after time to make them work with the efficiency that they do now.

Historically speaking
The process was present way back in the1960s itself. As can be assumed, the development cycle of an entire software program and its building was quite monolithic. Working out mismatches between the decided design, specifications and the finished implementable program would cause much waste of time, effort and money. This approach, also coined “Slaying the (software) Dragon” approach, puts all the pressure on the software designer who also then becomes the developer and he has to manage the entire “dragon” slaying by himself.

As time went by, easier methods to avoid these inconsistencies were found and therefore, saving cost rapid prototype , time and effort became possible. The finished software met not only the clients’ specifications but was able to modify itself to users’ benefit.

Go to Rapid Prototyping Software to get free information on this product. This website will give you all of the information you need on this topic along with a lot of other free information. Don’t miss out on this new website if you are looking for more information. Find us at longxiang-ltd.com

This technology is also used by the sculptors in order to achieve complicated shapes for display in any exhibition of fine arts. Rapid prototype creates 3D models with the help of virtual designs from animation modeling software or computer-aided design, which helps in transforming the design into thin layers, virtual and horizontal cross sections until the entire model is complete and all these can be done with the help of additive manufacturing technology present in rapid prototyping. With the use of this particular technology the virtual image can be easily transformed into the physical model.

• The additive manufacturing technology helps the machine to read data from computer aided design and builds the model with the help of layers of liquid, powder and sheet material. Various cross sections are used while building up the model. The layers are combined with the virtual cross section automatically to get the final shape.

• The biggest advantage of the rapid prototype fabrication is that it is able to form or create any type of geometric feature or shape.

• The stereo lithography helps in the plastic mould formation of the accurate shape of any object with the usage of triangular facets and aims at quality production.

• The models can be constructed within hours instead of days. The time depends on the complexity of the object to be created or the type of machine used. It definitely takes lesser time than the usual digital data or 3D.

• The technique of solid freeform fabrication uses two types of materials, the part material and the support material, which is later removed with a solvent, by water or by heat.

• There are 3D printers present in the rapid prototype machine that helps the manufacturers or the designers in the rapid development of the production.

• It helps the manufacturers by detecting the flaws and errors beforehand and thereby reduces the cost of re-work. It gives the right and clear concept of the idea and plan that is supposed to be implemented by the manufacturers.

• Rapid prototype helps in the construction of the prototype at a very low cost in a very short period of time. The plastic mold is almost similar to the actual product and it is created by the cross sections and forming layers in the free space until the model is prepared.

• It is beneficial for the implementation of new ideas and plans for the manufacturers and used in a short production cycle, where the time is very limited and the task is to be finished at a low capital investment.

Go to Rapid Prototype to get free information on this product. This website will give you all of the information you need on this topic along with a lot of other free information. Don’t miss out on this new website if you are looking for more information.

Related Prototype Fabrication Articles

Have you ever seen a wireframe with simulated data? Justinmind Prototyper allows the creation of much more than simple, static wireframes. You can have fully functional prototypes, with events and action as astonishing as search, behaviour changes and commenting systems.

It’s not just drawing a form. You can fill in data, and even create a login screen.

You can use widgets to create common web elements such as data inputs, buttons and such. But using datamasters, you can link these inputs to a table, where all the data is stored. So, if you want to import real information from a .csv file or type inside the program, don’t worry. Besides, changes done in the files can be exported to any other editor. Things you can simulate quite easily and you couldn’t with just a simple mockup:

filling a form searching for a product filtering data, such as bank account movements pagination of content such as posts, items in a store, etc Personalization of objects (showing things only to logged users, calling the user by his name, etc). And many other uses.

Tutorial: Creating a comment form wireframe using real data

Edit a social network’s profile just as if it was coded

What kind of changes can the users make in a prototype?

Insert data. Users can fill fields and submit this data to the datamaster, that acts like a database. For example, a sign up form can be filled and stored in your datamaster and then exported.

Modify data. Users can change a previously filled field (changing a password, for example, or editing a comment).

Delete data. Erase unwanted information with a command, just as if you were manipulating your database. All of these data manipulation commands are easy and can be configured via drag and drop.

What kind of data I can’t still use in Justinmind Prototyper

Of course, being a prototyping tool, you can’t have all the functionalities of a real website. Yet. For the moment, datamasters and datagrids only handle text and numbers. You can’t create a database of images, but you can still simulate by placing dummy images on your datagrid. Normal data, such as text areas and text lines, numbers, dates, emails, urls, percentages and money can be used normally.

Find More Prototyping Tools Database Articles

Contract electronics manufacturing service or EMS providers typically work with customers in a wide range of industries with differing requirements for inventory control, testing, product packaging, and product support. In some applications, the EMS provider simply assembles the printed circuit boards and then ships the boards to the customer. In other applications, the EMS provider will assemble the printed circuit board, load firmware/software into memory, test the board, and then assemble the board and associated cables, enclosures, and documentation into a finished product that is shipped to the customer.

Some customers will provide all of the materials (raw boards and electronic components) required for a job and the EMS provider assemblies the printed circuit boards, performs any required testing, and ships the finished boards to the customer. This is generally considered as inventory provided on a consignment basis where the EMS provider basically provides labor and expertise only. Some customers will provide some portion on the materials (such as specialty or high cost integrated circuits, proprietary parts such as transformers or coils, raw printed circuit boards, etc.) and rely on the EMS provider to purchase the remainder of the components needed to assemble the boards. Most EMS providers prefer to

use their own purchasing power, their extensive contacts, and their existing parts inventory where applicable to provide all of the required materials for a customer’s particular project. This method is generally considered as inventory provided on a turn-key basis.

But before any of this can happen, the EMS provider must provide an assembled board quote or pricing estimate to the customer for the project. In addition to the quantity commitments (production release quantity and annual usage quantity), this pricing process also requires a detailed bill of material from the customer along with a set of the Gerber files for the printed circuit board(s). The BOM should define all of the components along with the approved vendor and vendor’s part number for each component. This information allows the Materials Management group to determine availability (lead time), packaging, and pricing for each component based on the quantities and vendor information. The BOM information

is also needed to allow a technical review to determine the amount of labor and the equipment required to place the parts and to solder the components to the board.

The Gerber files for the printed circuit board design provide Materials Management with the information they need in order to get raw board pricing and lead times from the printed circuit board manufacturing vendors. The Gerber files also provide the Manufacturing Group with the information they need to develop the manufacturing plan (are components on top only or top and bottom of board; surface mount, thru hole, or mixed component types; wave solder or reflow oven processes required, etc.). The Manufacturing Group also has to estimate time to program the component placement equipment and to load the

components in the placement feeders (set-up costs), costs to order the solder paste stencil(s), and must also quantify test plans, procedures, and required test equipment. In order to correctly place components on the printed circuit board with each component properly oriented, the EMS provider will need silkscreen files to know the correct orientation of the parts on each side of the board. The screen paste files for surface mount applications will be required to order the stencils for the solder paste application to the board prior to the part placements.

All of this may seem to be a lot of information, but each piece is needed in order to provide the most cost effective pricing for the finished product. Fortunately, the Gerber files are usually readily available from the pcb design system as the Gerber format is the industry standard output format. The BOM is usually in the form of an Excel spreadsheet or formal drawing. Assist your EMS provider by providing the approved vendor’s name and part number for each component.

In Summary:

The information required to prepare an accurate quotation for a typical printed circuit board assembly project includes:

* Definition of inventory method (consignment, partial consignment, or turn-key).

* Complete Bill of Material with at least one manufacturer’s name and part number for each component along with notes identifying any component(s) to be supplied by the customer.

* Gerber files for the printed circuit board design(s).

* Estimated Annual Usage (EAU) quantities and production release quantities.

* Name of technical contact person, along with their telephone number, fax number, and email address.

Additional information that may be helpful if you have it available:

* Assembly, schematic, and PCB drawings.

* Sample board assembly or prototype board assembly to review.

* Test requirements and procedures required by the customer.

Jim Usery

Sales and Marketing Director

Innovative Circuits, Inc.

311A S Parkway St

Corinth, MS 38834

office 662-287-2007

toll free 866-887-7381

fax 662-665-9275

email jusery@icimfg.com

Visit our website at www.icimfg.com for more information about Innovative Circuits, Inc. and the services and expertise that we provide to our customers or for additional technical articles. You can also sign up for our free Ezine, PCB Information, at the bottom of the Home Page at www.icimfg.com.

Related Electronic Prototype Board Articles

More and more business owners and company employers are recognizing the need to buy their own ID card printers. These printers give you multitude of benefits. For one, they save you time and money because you no longer have to outsource your ID card printing needs to an outside printing service company. Apart from that, you can also customize your ID cards and make sure that they represent the business or company properly.

For most business owners who have experience with these types of printers, buying one for the business or company is not so much of a difficult task. However, it is important that you do your homework first before you buy this type of printer to ensure that you end up with the one most suitable for your needs and preferences. To ensure that you land the best option, here are the questions that you should ask yourself first before you go out or online to shop for this printer.

Do I need a card with a single side or double sides?

First, you have to determine whether you need single-sided or double-sided ID cards. Single-sided cards are practical for simple uses like student IDs and employee IDs. However, you can benefit from a double-sided card, if you have a large company or corporation or if you need the card to have additional information or security. Making a choice between the two prior to buying the printer will save you a lot in future costs.

Should I go for a monochrome or multi colored ID card?

Another question you need to answer is whether you need to print colored or monochromatic images on the ID cards. Monochromatic ID card printers are less expensive than full color printers but most business owners go for the latter because it is costlier to buy additional printer if they decide in the future to go full color.

Would I require additional features such as smart cards, proximity cards or magnetic stripes?

It is best that you get to know about these features before you make an attempt to purchase a printer for ID cards. Modern ID Card Printers do not only print information on the ID but also encode magnetic stripes, smart cards, and proximity cards to enhance usability and to increase security. These types of printers come equipped with preinstalled software that manages the printed and encoded data. These features are practical for banks, schools, hospitals, and large offices. Not only do these features promote ease of use, they also provide higher security.

Do I need to print ID with holograms?

Apart from the features mentioned above, there is another feature that you can consider for your ID card printing and that is printing of holograms. Holograms are effective in reducing risk of loss and alterations or forging of printed images. If your employees’ IDs have holograms, it would be difficult for an outsider to create a similar fake ID and get into your company.

Once you are able to answer these questions, it would be easier for you to buy the ID card printer that will be most suitable for you and your business.